1. First, Understand What These Testers Do Not Do
These are production test boards, not ISP tuning boards. They output RAW images – good for defect detection and sharpness calculation, not for final image quality tuning.
2. UC930 – For Standard D-PHY Modules (≤64MP)
Interface: D-PHY
Max resolution: 64MP
Cost-effective
Free adapter board (SF LOGO, with your module's connector) included
When to choose UC930: You are testing standard high-resolution modules (up to 64MP) and do not need C-PHY support.
3. CMU970 – For High-Pixel and C-PHY Modules
Interfaces: D-PHY and C-PHY
Supports higher pixel counts (no fixed upper limit stated)
Connection requirements:
表格
| Protocol | Required components |
|---|---|
| D-PHY | Tester + 1 dedicated sub‑board + 1 SF adapter board |
| C-PHY | Tester + 1 customized dedicated sub‑board (single board) |
When to choose CMU970: You need to test C-PHY modules, or D-PHY modules above 64MP that require higher signal stability.
4. Special Case – IMX989 Modules
Use the RX3 tester (Snapdragon edition).
5. What Is Included for Free
表格
| Model | Free included accessory |
|---|---|
| UC930 | 1x SF adapter board (with mating connector) |
| CMU970 (D-PHY) | 1x dedicated sub‑board + 1x adapter board |
| CMU970 (C‑PHY) | 1x customized dedicated sub‑board |
6. Software and Support
Software + driver + installation guide provided after shipment.
If a chip option is missing in the software: press "L" to load the .ini initialization code.
For debugging: customer sends video + photos of the test process, and we check where the process is stuck.
7. Ordering Notes
If ordering a module together with a tester, you can request a test video of that module before shipment.
