A 1080p camera may support HDR yet fail a project if the host interface is wrong. SincereFirst's new SC235HAI camera module brings 60 fps, fixed-focus optics and MIPI/DVP options into one selection discussion: imaging performance must match system connectivity.
HDR Is Only Useful in the Right Video Path
Industrial equipment and embedded AI devices often face mixed lighting and different processor platforms. A camera module needs to deliver the right image and speak the host's language.

SincereFirst has introduced SF-SAC2013SC-HDR-FPC-FF, a 2MP SmartSens SC235HAI module with 1920 × 1080 at up to 60 fps. Its 1/2.9-inch sensor uses 2.8 μm pixels and incorporates SmartClarity®-3, Lightbox IR® NIR enhancement and HDR technology.
The module offers MIPI and DVP interface options through a 30-pin gold-finger connection. Specified DVP output is 10-bit; MIPI offers 8/10-bit RAW RGB. These are interface paths to match to the host-not a claim of simultaneous dual output.
Fixed-focus optics provide 93° diagonal / 84° horizontal / 54° vertical FOV and a specified focus range of 35 cm to infinity.
Select by Host and Lighting
Before sampling, verify the host's interface and pinout, required frame rate, supported HDR mode, NIR illumination, and actual scene contrast. Sensor-level HDR or NIR capability must be checked in the selected module operating mode.
Estimated sample lead time is 5–7 working days, subject to confirmation. Contact SincereFirst to review your processor, lighting and imaging requirements.
A flexible interface is valuable only when the final image and host integration both work.





