Nov 20, 2026 Leave a message

3MP ESP32 Camera Module: Why Sensor Resolution Is Not Enough

An ESP32 camera project can fail before image quality is tested: the pinout, image format or software path may not match. SincereFirst's new 3MP OV3660 DVP module highlights what engineers should check beyond megapixels.

 

The ESP32 Integration Gap

For connected devices, compact inspection tools and prototypes, a camera is part of a memory-, bandwidth- and software-constrained system. A compatible sensor name does not automatically mean every ESP32 board can use the same camera configuration.

 

SF-SYKA36601 V10 1

 

A New OV3660 DVP Module

SincereFirst has introduced SF-SYKA36601 V1.0, using OMNIVISION's OV3660 CMOS sensor with OmniBSI backside-illuminated pixel technology. It offers 3MP (2048 × 1536) resolution and supports 1080p at 30 fps.

The module uses a 24-pin gold-finger DVP interface for ESP32-oriented designs. Listed output formats include RGB555, RGB444, CCIR656 and YCbCr422. It features a manually focused lens with 120° diagonal / 97° vertical FOV, F2.2 aperture and a specified focus range of 30 cm to infinity.

 

Check the Actual ESP32 Board

Verify DVP pin mapping, supported pixel formats, clocking, driver configuration and available memory before evaluation. The field of view and focus range should also match the target; a wide lens is not automatically suitable for close-up inspection.

Estimated sample lead time is 7–10 working days, subject to confirmation. Contact SincereFirst with your ESP32 board, frame-rate target and mechanical requirements.

 

In embedded vision, reliable integration starts with the host-not just the camera resolution.

Send Inquiry

whatsapp

Phone

VK

Inquiry