Introduction
Many OEM customers do not need a finished endoscope probe. They need a camera core that can fit into their own device structure, work with their own lighting system and match their own viewing distance.
For these customers, a bare endoscope camera module can be more useful than a standard LED-integrated probe. It gives the engineering team more freedom to design the housing, illumination, sealing, cable routing and final user experience.
The SF-C1011USB-D3.3-720P60 is a bare D3.3 USB endoscope camera module with OH01A10 sensor, 1280×800@60fps output, 95° / 130° FOV options and multiple focusing ranges. It is suitable for OEM customers who care about compact size, smooth image feedback, custom illumination and flexible optical integration.
Why Customers Choose a Bare Module
A finished probe can be convenient, but it may not match every project.
The built-in LED angle may not suit the target surface.
The waterproof shell may not fit the final housing.
The cable direction may conflict with the handle structure.
The FOV may be too narrow or too wide.
The focus distance may not match the actual application.
The customer may need a different lighting method.
A bare module gives customers more control over the final product design.
The SF-C1011USB-D3.3-720P60 is suitable for projects where the customer already has a device concept and needs a compact imaging core to integrate into it.
Product Overview
The SF-C1011USB-D3.3-720P60 is a separate-type USB endoscope camera module with a D3.3 camera head.
Key specifications include:
D3.3 camera head
OH01A10 sensor
1MP imaging class
YUV / MJPEG output
1280×800@60fps
No standard built-in LEDs
5mm front length
Plastic lens
95° / 130° FOV options
4–10mm / 5–50mm / 10–100mm focusing range options
IP67: No
1m standard cable
5m maximum cable length
40×15mm main board
Bonding wire front connector
Micro USB back connector
Dimming marked as Yes, subject to project lighting design confirmation
These specifications show that the module is designed for custom OEM integration rather than finished probe use.
Customer Pain Point 1: "The standard LED module does not match our lighting needs."
Lighting is one of the most common reasons for endoscope camera sample failure.
Some surfaces reflect strongly.
Some cavities need side lighting.
Some projects require external LEDs.
Some devices need the light source separated from the camera head.
Some customers want to control brightness through the host system.
Because this model does not include standard built-in LEDs, it is more suitable for customers who want to design their own illumination system.
Although dimming is marked as Yes in the catalog, the actual dimming function should be confirmed based on the customer's lighting design, because the standard module itself has no LEDs.
Customer Pain Point 2: "We need to choose the right FOV before tooling."
FOV selection affects the user's real viewing experience.
The 95° option is useful when the customer needs a more focused view.
The 130° option is useful when the customer needs a wider viewing area in narrow spaces.
Customers should not choose FOV only by looking at the number. The correct choice depends on:
Working distance
Target size
Cavity diameter
User operation method
Need for context or detail
Screen display size
Inspection purpose
Sample testing is strongly recommended before final confirmation.
Customer Pain Point 3: "Our working distance is different from standard modules."
Many endoscope camera problems come from focus mismatch. The sensor may be suitable, and the resolution may be acceptable, but the image still looks unclear because the working distance does not match the lens.
This model provides multiple focusing range options:
4–10mm
5–50mm
10–100mm
This helps customers select a lens configuration based on the real application. For very close inspection, 4–10mm may be more suitable. For general close-range visualization, 5–50mm may work better. For longer close-to-medium viewing, 10–100mm can be evaluated.
Customer Pain Point 4: "The cable and board must fit the final product."
Mechanical integration is often underestimated.
The SF-C1011USB-D3.3-720P60 uses a 40×15mm main board, 1m standard cable and up to 5m maximum cable length. These details matter because the board, cable and connector must fit the final device layout.
Customers should confirm:
Can the 40×15mm board fit inside the handle or control box?
Is 1m cable enough for the prototype?
Is a longer cable needed for the final device?
Will 5m cable length remain stable in the actual system?
Can the bonding wire front connection be protected?
Does the Micro USB back connector match the host system?
These questions should be answered before mass production planning.
Customer Pain Point 5: "We need waterproof performance, but this model is not IP67."
The catalog marks this model as IP67 No. This means customers should not treat it as a waterproof endoscope probe.
If the final product needs waterproof performance, customers have two options:
Use this module as an internal imaging core inside a customer-designed sealed structure.
Choose another IP67-supported endoscope camera module.
For medical, industrial or cleaning-sensitive environments, waterproof requirements should be discussed early. Final waterproof performance depends on the complete device structure, not only the camera module.
Suitable OEM Applications
This model can be evaluated for:
Custom medical visualization devices
Dental and oral inspection tools
Veterinary endoscope devices
Industrial inspection systems
Compact borescope devices
Handheld USB visualization tools
Device-integrated camera probes
Custom endoscope product development
It is especially suitable for customers who want to design their own lighting and structure around a compact 60fps camera core.
When This Model Is a Good Fit
Choose the SF-C1011USB-D3.3-720P60 when your project needs:
D3.3 compact camera head
1280×800@60fps output
Custom lighting design
95° or 130° FOV selection
Working distance matching
USB image output
Flexible cable length up to 5m
Bare module integration
Device-level housing design
When Another Model May Be Better
Choose another model if your project needs:
Built-in LEDs as a standard feature
Confirmed IP67 waterproof camera head
Steel shell protection
1080P60 or higher image detail
5MP or 12MP imaging
Finished plug-and-play inspection camera
Very specific medical device compliance support at module level
The right choice depends on the whole device, not only the camera module model number.
Sample Testing Recommendations
After receiving samples, customers should test:
Image smoothness during movement
95° and 130° FOV in the real scene
Selected focusing range at actual working distance
External lighting performance
Cable length and signal stability
Board placement inside the device
Connector layout
Mechanical protection
Waterproof structure if required
Host compatibility
A desktop image test is only the first step. Real evaluation should be done inside the customer's device structure or a realistic test environment.
RFQ Checklist
To help SincereFull evaluate the project faster, customers should provide:
Application scenario
Medical or industrial direction
Required diameter
Preferred frame rate
Required FOV
Actual working distance
Lighting design method
Need for dimming
Waterproof requirement
Cable length
Board space
Connector preference
Host device
Sample quantity
Estimated production volume
Mechanical drawing if available
Complete RFQ information helps reduce unnecessary sample rounds and improves model selection accuracy.
Conclusion
The SF-C1011USB-D3.3-720P60 is a compact bare USB endoscope camera module for customers who need 60fps image feedback, custom lighting design, flexible FOV selection and OEM device integration.
It is not the best choice for customers who need a ready-made waterproof LED probe. But for customers building their own endoscope device structure, it can be a practical imaging core with strong integration flexibility.
CTA
Developing a compact endoscope device with custom lighting and specific FOV requirements?
Send your application, working distance, FOV preference, lighting method, cable length and device structure to SincereFull. We can help evaluate whether SF-C1011USB-D3.3-720P60 is suitable for your OEM integration project.
